Pacemaker Fishing Forum

I then worked on the anchor trolley, which I was able to attach to my slide trax system.  I sewed and then shrink wrapped all of the connections together, as it provides for the best connection.







I tied parachute cord to an anchor and added a float to use.  You an also see that I tied the parachute cord to the bottom of the anchor and then ziptied it to the top so that I can pop the ziptie in case of it getting stuck, it will make for an easy release.    I also attached some rope to a clamp so that I can clamp to trees and position myself with the trolley so that I can hold position that way.



I attached my Lowrance Elite 5 to a ram mount, on a ram screwball so that I can position it many different ways depending if I am sitting in the captains seat, the paddling seat, or standing.



I have it attached to a deer camera battery that is in a waterproof box.



I made the connection with connectors so that I can separate the battery from the depthfinder.



I ran all the wires up out of the way and stored the excess out of the way using these clamp clips so I can take it apart easily.



The transducer is attached to a micro liberator, which I still need to cover in electrical tape I just wanted to test it first.  It allows for me to raise it up out of the water when needed.





I put silent traction system in the front and back to dampen the noise.





I then put some logos of good companies on.  Missle Baits and Gamma who sponsor our club.  As well as ARC, KBF, YakAttack, and Hook1 who are just good companies that I support.





Here you can also see the zig zag cleats that I put in for the trolley and tying off.

Last edited by redskinsfan360 (Jul-26-12 6:17PM)

Wow. I am completely impressed by your creativity and handiness. You should open up a kayak customization service and call it "Pimp my 'Yak"

redskinsfan360 wrote:

Here is an alright picture of the whole thing.

Impressive!

That yak looks amazing!  Great job!!  Everything really looks professionally done.

redskinsfan360 wrote:

Can't wait to slime it with some bass this weekend and hopefully a snakehead!

Where are you headed?

I will have the boat out there with an out of town friend that needs to catch a few fish!

If you guys are paddling for snakeheads, can I tag along?

I can't go Sat morning, but Tyler and I would love to go with you guys any other time this weekend.

Sunday?